Best RV Roof Replacement

We tried out the RecPro RV Extreme Duty Rubber Roof Kit and were impressed with its performance. The PVC material feels tough and long-lasting. It’s a big step up from older EPDM roofs we’ve used before.

The white color does a good job reflecting heat. We noticed our RV stayed cooler inside on sunny days. This could help save on air conditioning costs during summer trips.

Installing the roof was pretty simple. The kit comes with everything needed, which is nice. We didn’t have to run out for extra supplies. The 8.5-foot width fit our RV well, with some room to spare.

One thing to note: there are no instructions in the box. We had to look up a video online to figure out the process. It’s not too hard, but some guidance would have been helpful.

The roof arrived folded, which worried us at first. But once we laid it out in the sun, the creases mostly disappeared. Just be careful when unfolding to avoid damage.

Cleaning this roof is a breeze. We’ve noticed it doesn’t get as dirty as our old roof. When it does need washing, a quick spray with the hose usually does the trick.

The RecPro RV PVC Rubber Roof Kit is a solid choice for camper and motorhome owners. We found the material to be tough and flexible, standing up well to different weather conditions. The UV protection is a big plus, helping to keep the roof looking good for longer.

We liked that the color runs all the way through the roofing membrane. This means even if there’s a scratch, it won’t show up as much. The fact that it won’t tear or puncture easily gave us peace of mind when thinking about tree branches or other potential hazards.

One thing to note – you might need to buy extra sealant and tape to finish the job. We wish RecPro included more of these in the kit. Also, while the product is great, the lack of clear installation instructions could be a problem for some users. Despite these small issues, we think this American-made roof kit is a good pick for most RV owners.

We recently tested the Livpow RV Roof Vent in our trailer, and we were impressed by its ease of installation. The one-piece frame fit snugly into our 14″ x 14″ roof opening without any fuss. We appreciated that it works with different roof thicknesses, from 1-1/4″ to 2-1/4″, making it a versatile option for many RVs.

The manual crank system is smooth and easy to use. We found it nice not to worry about wiring or power sources. The translucent white lid lets in a pleasant amount of natural light, brightening up the interior of our RV.

On the downside, the plastic construction, while lightweight, may not be as durable as metal alternatives. We also noticed that some extra sealant might be needed for a completely watertight seal, depending on your roof’s condition. While the manual operation is simple, it lacks the convenience of electric models with remote controls or rain sensors.

We recently tried out the Camp’N RV Roof Vent Cover, and we were pleased with how simple it was to set up. The 14-inch by 14-inch size fits many common RV vents, which is great for most campers.

The tough plastic held up well when we tested it in windy conditions. It didn’t crack or bend, giving us peace of mind for future trips. We liked that it came with all the bits and pieces needed for setup.

One thing to note is that it only comes in white. While this might not be a big deal for most, some RV owners might prefer other colors to match their camper’s look. We found the directions clear and easy to follow, which made the whole process quick and stress-free.

We tested the RecPro Extreme Duty RV Rubber Roof on our own camper and were impressed with its performance. The material is much lighter than traditional roofing options, making it a breeze to handle during installation. We found it cut easily with basic tools, which was helpful when fitting it to our RV’s specific dimensions.

One thing that stood out was how well this roof stood up to the elements. During a heavy rainstorm, we didn’t notice any leaks or water seepage. The rubber material also seemed to help keep the interior of our RV cooler on hot days, which was a nice bonus.

We did run into a few snags, though. The roofing arrived folded in a box, which left some creases that were tough to smooth out. It took some effort to get it flat before installation. Also, since both sides of the material are smooth, we weren’t sure which side should face up at first. We recommend checking the instructions carefully before starting your project.

We recently tried out these LuxLead RV vent caps on our camper. The installation was a breeze – we just lined up the screw holes and attached them to our roof. We made sure to use some silicone caulk around the edges for a tight seal.

These caps fit pipes from 1 inch to 2-3/8 inches in diameter. They did a great job keeping unpleasant smells out of our RV. The white plastic looks clean and blends in well with most RV roofs.

We liked that the package includes two caps. This gave us a spare in case one gets damaged. The snap-on design of the top part makes it easy to remove for cleaning. While they’re made of plastic, they feel sturdy and UV-resistant. We expect them to last through many camping trips.

We recently tried out the RecPro RV Slide Out Roof Kit, and we were impressed by its performance. The 4-foot wide PVC material felt sturdy and well-made. When we installed it, we noticed how the .027-inch thickness added extra protection against the elements.

One thing we really liked was how this kit helped keep our RV cooler. The shiny side reflects sunlight, which made a noticeable difference in interior temperature. We also appreciated that it’s maintenance-free, saving us time and effort on upkeep.

During our testing, we found the watertight seal to be very effective. We didn’t spot any leaks, even during heavy rain. The kit comes with plenty of adhesive and caulking, which made the installation process smoother. Just remember to wear old clothes and gloves – it can get messy!

We recently tried out the Camco RV Roof Vent on a weekend camping trip. The installation was pretty simple, and we had it up and running in no time. It fit well in place of our old vent, which was a big plus.

One thing we really liked was how it kept the rain out. We hit some bad weather, but the vent stayed dry inside. The built-in screen was great too – we got fresh air without any unwanted bugs.

The translucent lid was a nice touch. It let in some extra light during the day, making our RV feel brighter and more open. We did notice that some of the parts felt a bit flimsy, though. The metal lips were slightly bent when we got it, but we were able to straighten them out.

We had to buy some extra screws, as they weren’t included. The inside trim didn’t fit perfectly either, leaving small gaps in places. These weren’t deal-breakers, but worth noting.

All in all, we found the Camco RV Roof Vent to be a good value. It’s not perfect, but it does the job well and improves both ventilation and lighting in the RV.

We recently tested Heng’s 14″ RV Roof Vent and found it to be a practical addition to any RV. The installation was straightforward, even for those of us with limited DIY experience. We appreciated the pre-drilled holes, which made mounting a breeze.

The vent’s strong mesh screen stood out to us. It kept bugs and debris out while allowing for good airflow. We liked how it fit snugly in the 14.5″ x 14.5″ cut-out, leaving no gaps for water to seep in.

During our testing, we noticed the vent worked well in different weather conditions. It stayed secure during windy days and didn’t leak during light rain. The white color blended nicely with our RV’s roof, though we wish there were more color options available.

We recently tested this ICON AC shroud on our RV, and we were impressed by its sturdy construction. The thick, UV-resistant plastic feels much more solid than the original shroud it replaced. We found it a breeze to install, using the existing bolt holes on our Dometic Duo Therm unit.

The polar white color matched our RV’s exterior perfectly. It gave our rig a fresh, updated look. We noticed the shroud did a great job of protecting the AC unit from the elements during our latest camping trip.

While most users report a perfect fit, we did notice some folks had trouble with screw hole alignment. We didn’t run into this issue, but it’s worth noting. Make sure to double-check your AC model number before buying. This shroud only works with newer Brisk Air models.